Service Interval Warning Light - Reset Information

These servicing warning lights are normally reset (turned off) by the main dealer once they have finished servicing your vehicle.

If you have just serviced your vehicle yourself, or had it serviced in a local garage you may find that the 'service interval warning light' still needs to be reset to turned the light off.

This is a very simple process you can complete yourself, select your vehicle model & age from the list below and complete this easy to follow procedure. Any questions email sille@btconnect.com


206 (1.4) - 1998 onwards

Switch ignition OFF.

Press and hold button [A].

Switch ignition ON.

Keep button [A] depressed for 10 seconds.

Display will now read 0 and 'spanner' symbol will go out.


207 (1.4) - 2006 onwards

Switch ignition OFF.

Press and hold button [A].

Switch ignition ON.

When display shows '=0' release button [A].

Switch ignition OFF.

Note: If the battery needs to be disconnected after the service interval indicator has been reset, lock the vehicle and wait at least 5 minutes. 


306 1996 onwards

Switch ignition off
Press and hold button [A]
Switch ignition on
Keep button A depressed for 10 sec
Display will now read 0 & spanner symbol will go out.


307 (1.4) - 2001 onwards

Switch ignition OFF.

Press and hold button [A].

Switch ignition ON.

Keep button [A] depressed for 10 seconds.

Display will now read 0 and 'spanner' symbol will go out.


406 - 1998 onwards
Switch ignition off
Press and hold button [A]
Switch ignition on
Keep button A depressed for 10 sec
Display will now read 0 & spanner symbol will go out
.

407 (1.6D HDi) - 2004 onwards

Switch ignition OFF.

Press and hold button [A].

Switch ignition ON.

Keep button [A] depressed.

Display starts to count down.

When the display shows '=0' release button [A] and 'spanner' symbol will go out.


607 (2.2) - 2000 onwards

Switch ignition OFF.

Press and hold button [A].

Switch ignition ON.

Keep button [A] depressed for 10 seconds.

Display will now read 0 and 'spanner' symbol will go out.


806 - 1999 onwards

Switch ignition OFF.

Press and hold button [A].

Switch ignition ON.

Keep button [A] depressed for 10 seconds.

Display will now read 0 and 'spanner' symbol will go out.


807 (2.0D HDi) - 2002 onwards

Switch ignition OFF.

Press and hold button [A].

Switch ignition ON.

Keep button [A] depressed until display reads 0 and 'spanner' symbol will go out.

Switch ignition OFF.


1007 (1.4)  - 2005 onwards

Switch ignition OFF.

Press and hold button [A].

Switch ignition ON.

When display shows '=0' release button [A].

Switch ignition OFF.

Note: If the battery needs to be disconnected after the service interval indicator has been reset, lock the vehicle and wait at least 5 minutes. 


Expert (2.0D HDi) - 1999 onwards

Switch ignition OFF.

Press and hold button [A].

Switch ignition ON.

Keep button [A] depressed for 10 seconds.

Display will now read 0 and 'spanner' symbol will go out.


Partner (2.0D HDi) - 1999 onwards

Switch ignition OFF.

Press and hold button [A].

Switch ignition ON.

Keep button [A] depressed for 10 seconds.

Display will now read 0 and 'spanner' symbol will go out.